Price: $57.99
(as of Apr 10, 2025 11:49:37 UTC – Details)
Product Description
MySpool Battery Powered Water Level Alert is a smart device that sends an alert when water level rises or falls. That alert can be a text message or email, or both. Optionally, this device can also send you push notifications.
This Water Level Alert comes with a waterproof float sensor with a 5 ft wire. The float sensor can be used to detect high or low water levels. An alert is sent if the float rises to signal high water level. Flip the float ring to send alert when water level falls. Mounting bracket and 3 AAA batteries are included. Batteries are good for 500 alerts or more. Remaining battery charge information is included with every message sent. Batteries are not used at all unless your device is sending an alert. They are shipped with an estimated shelf life of at least 7 years.
Battery Powered Water Level Alert is configured to use your WiFi. The WiFi setup takes a few minutes with a smart phone or a laptop. Once your Water Level Alert has been setup, your email address and phone number need to be specified on the myspool.com device configuration page. That page, as well as other user pages displaying device status and recent alerts, are in a secure user area on myspool.com. That area is also used for configuring settings such as text message content and hours of operation. It is accessible to owners of MySpool devices.
When setup has been completed, any time water is detected, an email will be sent to you. If configured, you will also get a text message and a push notification.
Summary:
Be Alerted of Leaks while away from home or business MySpool Water Level Alert is a smart water level sensor that sends email, text, and smartphone alerts to homeowners, renters, business owners, and property managers as soon as water level change is detected. Avoid costly repairs by keeping the Water Level Alert anywhere that has the potential for flooding or developing a leak.
No Hub Required With MySpool Water Level Alert you avoid the limitations of other hub-based and wired products. Each Water Level Alert works independently with your Wi-Fi network and can be placed in multiple locations throughout your home or business. Your notifications will include your text for each Water Level Alert that you specify in the device configuration. Name your location and place it near sinks, refrigerators, washers, sump pumps and in basements.
No Fees There are no fees for using Water Level Alert for any kind of alert notifications.
Flexible design Water Level Alert comes with a waterproof float sensor with a 5 ft wire and a mounting bracket for PVC pipe installation. The only requirement for the Water Level Alert location is that a 2.4GHz WiFi network are available to access MySpool cloud servers.
A must-have For renters, homeowners, property managers, and business owners everywhere, the Water Level Alert is a must-have device, saving you thousands of dollars in damage and costly repairs.
Setup Instructions for all myspool devices are available online on myspool.com. This is a summary:
Connect your device to WiFi and trigger an alert: with wires pointing up, dip the float in a cup of waterCreate an account on myspool.com and click on email link to confirm it or login to your existing accountConfirm your email subscription for this device to receive alert notifications
You are done: trigger an alert from your device again and receive an email notification!
You can add a phone number and change message and other settings at any time.
Device Configuration: 3 steps
MySpool device setup Summary
1. Connect your device to WiFi
2. Create account on myspool.com
3. Configure your email and text message on myspool.com
The first step is the most challenging one. It should also be done first so that MySpool servers can identify your device when you login to configure it.
Step 1. Connect your device to WiFi
Open your phone, go to Settings, and choose Wi-Fi. Under the CHOOSE A NETWORK tab you will see available networks. One of them will be the MySpool Device. It will look like SASensor-000000 where “000000” is the unique device ID. In the example it is shown as SASensor-2336877. Click on it.
Once connection is established, which may take a few seconds, it will open a browser window with Alerts WiFi Manager.
Step 1, continued. Configure WiFi
Click Configure WiFI. You will see a list of networks that MySpool device can use.
Select your WiFi router and enter its password. Click Save. Note: SAS network will not be visible on your phone after this step.
You can now use your laptop or smartphone to create an account on myspool.com and specify where you want your emails and text messages sent.
Email and text message notification when water level change is detected. All services are free.
Battery powered wireless water level detector using your WiFi, no app to install and no hub is required. Perfect as a standalone high or low water alarm. Mounting bracket is included.
Waterproof float sensor with a 5 ft wire connected to a rugged enclosure protecting smart electronics. This float sensor can be used to detect high or low water levels, the default setting detects high water levels. Flip the float ring and use this device to detect low water levels in aquariums, ponds, and storage tanks.
Alert is sent if the float rises to signal high water level. Flip the float ring to send alert when water level falls. 3 AAA batteries are included. Batteries are good for 500 alerts or more. Remaining battery charge information is included with every message sent. Batteries are not used at all unless your device is sending an alert. They are shipped with an estimated shelf life of at least 7 years.
Rugged enclosure supports up to 250 lbs, designed to operate in dusty and moldy environments. Avoid costly repairs by keeping MySpool Water Detector anywhere that has the potential for flooding or developing a leak.
Customers say
Customers find the water detector easy to set up with clear instructions and appreciate its functionality in sending emails and text messages. Moreover, the device offers good value with no fees, and customers praise its water level monitoring capabilities, with one noting it immediately alerts when water is detected. Additionally, the build quality is impressive, and customers like that it runs on batteries that last for years. However, connectivity experiences are mixed, with some reporting good WiFi performance while others struggle with connection issues.
AI-generated from the text of customer reviews
F4ther –
Easy to install sensor – definitely recommend!
It was super simple to install and worked right away – took about 10 minutes, if that. Most of the time, when it comes to devices like this, there is some configuration and troubleshooting. Not the case with this one. I’ve been having issues with my sump clogging every so often, and this was a simple fix. Now, I can be alerted immediately once the water level hits the sensor’s point. I definitely recommend it!
Homer123 –
Perfect solution! Simplest thing ever.
Setup only took a few minutes. Installation into my sump pump took even less time. We have a crock that is constantly filling, and a sump failure gone undetected would be horrible in a finished basement. This has to be the simplest device to let you know of any issues, especially while away from home. Just a fantastic product and no fees! The original “alarm” that came “professionally installed” isn’t nearly as nice and functional. Don’t hesitate!!! Grab this so you don’t come home from vacation and find you house became a pool.
MB –
Great product
This is the 2nd My Spool water detector I have used. The last one worked without issue for years. In a new house now and wanted the same protection. It can be finicky to set up the wifi with an Android phone, once it’s setup, your good. Can be set up for email and text notifications. Very simple to installHighly recommend.
Clare R. Rayburn –
Good product to detect increasing sump pit water leves – works exactly as described.
What an economical and effective product! My set-up and test worked perfectly (text and e-mail alerts). The only two things that would improve this design are 1) the incorporation of a loud, audible alarm 2) 5G wireless transmitter as opposed to being reliant on household Wifi. During a major rain/thunderstorm, the biggest concern is the power being knocked out and the sump pump/pit potentially overflowing due to lack of household power – in this scenario, this product would not provide an alert because it requires Wifi to send alerts, and Wifi will not work without household power. Still nice to have this product for situations of pump failure or other scenarios to detect high water in your sump pit. Good but not a perfect product in my view.
Taylor Sailors –
Peace of mind
Installation was very easy. It certainly gives me a peace of mind knowing that if the sump pump was to go out for any reason, it is there for a second line defense. It sends a text instantaneously to my cell phone to let me know that there is rising water and we can catch it before the basement is flooded.
Bruce –
Great product
Was easy to set up. Worked with no issues.
John Thompson –
Very nice system
Had a sump pump failure with a different sensor and didnât get notified of the water rising I decided to do some research for a more reliable alarm system and stumbled on the myspool float alarm system and glad I did.Easy installation and setup with great support when I needed a question answered. Highly recommend it. Love the float option. Got a piece of Velcro to secure it to the pipe. Has a green indicator light to show that itâs working. Has text plus email notifications when there is a failure.
Jay –
works reliable
reliable device. But email alert works for the first email not following emails, the sensor board is too wide to fit into 1.5 inch pipes
Mike M –
I purchased this unit on Nov 1, 2023. On Oct 31, 2024, I started receiving false Internet OFF alerts. Tech Support did help me troubleshoot the issue but it seems like the unit is not operating as intended. I was expecting a 1 year warranty and disappointed to find out itâs only a 6 month warranty. Was hoping that they would just replace it free of charge considering itâs only been a year. Disappointing customer service.
Amazona –
The first one I got was faulty but the company replaced it no charge right away. It works perfectly well. Super recommended. Easy to install and operate. Great value for money
Julian Gray –
This device has been working now for a good few months. We use it to keep an eye on the pond temperature, and to notify if the pond level falls dangerously low. (which would imply a leak in the water circulation). Setup was fairly easy. The temp probe cable was a bit short – but that was of course fixable for a half confident hobbyist. I don’t find the backend software reporting to be as useful as I’d like. But fundamentally I can recommend this, and the support team were very quick to answer my questions. Please note that the water level sensor is binary (Is there water/is there not water). The supplied sensor wasn’t suitable for my needs so I replaced it with a much superior product. A very good little unit – slight room for improvements.
Charles Hitchcock –
Device works great, notifications are sent to my email and SMS.Here is how to configure it out of the box.1. Go to MySpool.com and register for an account. An email will be sent to you, confirm it by clicking link2. Dip the water sensor end into water for a couple second (that kicks off the device setup)3. On computer or mobile, open WIFI and connect to the SASensor-####### (# denotes your device ID)4. Open webbrowser such as Chrome, Edge on your computer or mobile and in the address bar, type 10.10.4.15. Configure you 2.4ghz WIFI, click SAVE. NOTE: it will test that wifi and if it doesn’t accept it, you will continue to see a SASensor-###### in your WIFI SSID list. If it accepts your WIFI, that will disappear.6. Log into your MySpool.com portal, click My Devices and you should see your device there now.7. Click on Configure Device, enter your email addresses, phone number and also click Advanced Setting to change notification intervalsKeep in mind, this unit requires your WIFI connection. The sensor device sends regular heartbeats back to the vendors servers with updates on water sensing alerts. If WIFI isn’t working or if the device fails to call back at regular intervals, server marks missed heartbeats and will indicate it accordingly. For best practice, you may wish to have a UPS hooked up to this sensor and to your WIFI modem and router should your environment consider water monitoring a critical requirement (such as server rooms or basements where sump pumps are hooked up)Hope this helps.
Franck Nowak –
as desceibed